UNIDENTIFIED

AB-862G SUPER I/O CARD

  Data bus:                  16-bit ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

                    Function                             Location

  40-pin primary IDE(AT) connector                         CN1

  34-pin cable connector - floppy drive                    CN2

  10-pin serial port 2 - internal                          CN3

  9-pin serial port 1 - external, 10-pin                   CN4
  serial port 1 internal

  25-pin parallel port - external                          CN5

  16-pin game port                                         CN6

  2-pin connector - drive active LED                       JP1

                        USER CONFIGURABLE SETTINGS

             Function                   Location            Setting

  Hard disk is present                     JP2          pins 1 & 2 closed

  Hard disk is not present                 JP2          pins 2 & 3 closed

  Game port enabled                        JP3          pins 1 & 2 closed

  Game port disabled                       JP3          pins 2 & 3 closed

  Floppy drive interface enabled           JP4          pins 1 & 2 closed

  Floppy drive interface disabled          JP4          pins 2 & 3 closed

  IOCHRDY signal enabled                   JP5          pins 1 & 2 closed

  IOCHRDY signal disabled                  JP5          pins 2 & 3 closed

                        USER CONFIGURABLE SETTINGS

             Function                   Location            Setting

  IDE interface enabled                    JP6          pins 1 & 2 closed

  IDE interface disabled                   JP6          pins 2 & 3 closed

  Serial port 1 enabled                    JP7          pins 1 & 2 closed

  Serial port 1 disabled                   JP7          pins 2 & 3 closed

  Parallel port address is 378h            JP8          pins 1 & 2 closed

  Parallel port address is 278h            JP8          pins 2 & 3 closed

  Serial port 2 enabled                    JP9          pins 1 & 2 closed

  Serial port 2 disabled                   JP9          pins 2 & 3 closed